Cleaning The Drawer Front And Glass Lid; Cleaning The Vacuum Chamber And Sealing Bar; Cleaning The Vacuum Adapter - Miele EVS 6114 Operating And Installation Instructions

Cleaning and care
If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discolouration or
damage.
Remove any soiling immediately.
Cleaning the drawer front and
glass lid
 Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfibre cloth.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Cleaning the vacuum chamber
and sealing bar

Avoid damaging the drawer!
Liquid getting into the vacuum pump
air intake valve can result in damage
to the vacuum pump.
Take care that water does not get
into the air intake valve.
Useful tip: For easier cleaning of the
vacuum chamber and sealing bar the
sealing bar can be lifted out.
 Remove light soiling immediately
using a solution of hot water and
washing-up liquid applied with a
clean sponge or use a clean, damp
microfibre cloth.
 Remove any residual cleaning agent
with some clean water.
 After cleaning, wipe the surfaces dry
using a soft cloth.
28

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and washing-up liquid or a
clean, damp microfibre cloth.
 Then dry the vacuum adapter
thoroughly with a soft cloth.
 Do not use the vacuum adapter again
until it is completely dry.