Cleaning The Drawer Front And Glass Lid; Cleaning The Vacuum Chamber And Sealing Bar; Cleaning The Vacuum Adapter - Miele EVS 6214 Operating And Installation Instructions

If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discolouration or
damage.
Soiling is best removed after each
use.
Cleaning the drawer front and
glass lid
 Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfibre cloth.
 Then wipe the surfaces dry using a
soft cloth.
Cleaning the vacuum chamber
and sealing bar

Avoid damaging the drawer!
Liquid getting into the vacuum pump
air intake valve can result in damage
to the vacuum pump.
Take care that water does not get
into the air intake valve.
Tip: For easier cleaning the sealing bar
can be lifted off.
 Remove light soiling immediately us-
ing a solution of hot water and wash-
ing-up liquid applied with a clean
sponge or use a clean, damp mi-
crofibre cloth.
 Remove any residual cleaning agent
with a little clean water.
 Then wipe the surfaces dry using a
soft cloth.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Cleaning and care

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and washing-up liquid or a
clean, damp microfibre cloth.
 Then dry the vacuum adapter thor-
oughly with a soft cloth.
 Do not use the vacuum adapter again
until it is completely dry.
29