Cleaning The Drawer Front And Glass Lid; Cleaning The Vacuum Chamber And Sealing Bar; Cleaning The Vacuum Adapter - Miele EVS 6114 Operating And Installation Instructions

If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discoloration or
damage.
Soiling is best removed after each
use.
Cleaning the drawer front and
glass lid
 Remove soiling and fingerprints with
a standard domestic glass cleaner or
with a clean, damp microfiber cloth.
 Then wipe the surfaces dry using a
soft cloth.
Cleaning the vacuum chamber
and sealing bar

Do not damage the drawer!
If liquid gets into the vacuum pump
air intake valve, this can result in
damage to the vacuum pump.
Ensure that water does not get into
the air intake valve.
Tip: The sealing bar can be lifted off to
make cleaning easier.
 Remove light soiling immediately us-
ing a solution of hot water and liquid
dish soap applied with a clean
sponge or use a clean, damp mi-
crofiber cloth.
 Remove any residual cleaning agent
with a little clean water.
 Then wipe the surfaces dry using a
soft cloth.
Cleaning and care

Cleaning the vacuum adapter

 Clean the vacuum adapter with a
clean sponge and a solution of hot
water and liquid dish soap or a clean,
damp microfiber cloth.
 Then dry the vacuum adapter thor-
oughly with a soft cloth.
 Do not use the vacuum adapter again
until it is completely dry.
27