Problem Solving Guide - Miele EVS 6114 Operating And Installation Instructions

Problem solving guide

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. If, after reading this guide, you can't remedy the problem
yourself, please call Miele (see back cover for details).
Please note, however, that a call-out charge will be applied to unnecessary service
visits where the problem could have been rectified as described in these operating
instructions.

Danger of injury! Installation, maintenance and repairs may only be carried
out by a suitably qualified and competent person.
Repairs and other work by unqualified persons could be dangerous. Miele
cannot be held liable for unauthorised work.
Do not attempt to open the casing of the appliance yourself.
Problem
The drawer will not
open.
The drawer cannot be
switched on.
There was a loud bang
during operation.
The drawer has
switched itself off.
The sensors are not
reacting to touch.
30
Possible cause and remedy
The safety screws on the back of the drawer have not
been removed.
 Call Miele.
The appliance is not correctly plugged in and
switched on at the mains socket.
 Insert the plug and switch on at the socket.
The circuit breaker is defective or has tripped.
 Reset the circuit breaker in the mains fuse box
(minimum fuse rating - see data plate). If, after
resetting the circuit breaker in the mains fuse box
and switching the appliance back on, the
appliance will still not heat up, contact a qualified
electrician or Miele.
The transit device has not been removed and the air
filter has not been fitted.
 Call Miele.
The drawer will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
vacuuming process.
 Switch the drawer back on.
Foreign objects, soiling or liquid residues have got
onto the control panel.
 Remove the objects and/or clean the control
panel.