Electric cooktop, fryer, contact grill, electric barbecue (16 pages)
Summary of Contents for Miele ESW 7010
Page 1
Operating and installation instructions Gourmet warming drawer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-AE, SA M.-Nr. 11 260 610...
Contents Warning and Safety instructions..............Caring for the environment ................11 Guide to the appliance ..................12 ESW 7010, ESW 7110..................12 ESW 7020, ESW 7030, ESW 7120 ..............13 Controls and indicators ..................14 Accessories supplied ..................15 Before using for the first time ................16 Cleaning the drawer for the first time ..............
Page 3
Installation......................42 Safety instructions for installation ............... 42 Installation notes ....................43 Installation dimensions ESW 7010, ESW 7110 ........... 44 Combination appliance for niches with a height of 450 mm......44 Combination appliance for niches with a height of 590 mm......45 Side view ......................46 Connections and ventilation................
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating and installation instructions in a safe place...
Page 5
Warning and Safety instructions Correct application The drawer is intended for domestic use and use in other similar environments. The drawer is not intended for outdoor use. It is intended for domestic use only as described in these operating instructions.
Page 6
Warning and Safety instructions Safety with children Children under the age of 8 years must be kept away from the drawer unless they are constantly supervised. Children aged 8 and older may only use the drawer without supervision if they have been shown how to use it and are able to do so in a safe manner.
Page 7
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance.
Page 8
Miele authorised service technician. Otherwise the warranty is invalidated. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
Page 9
Warning and Safety instructions Correct use You could burn yourself on the hot drawer or hot dishes. Protect your hands with heat-resistant pot holders or gloves when handling hot appliances. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burning yourself.
Page 10
Warning and Safety instructions The Keeping food warm function is designed to keep hot food warm and not to warm up cold food. Ensure food is really hot when placed inside the drawer. Bacteria can develop on the food if the temperature is too low. Make sure that you set a high enough temperature to keep food warm.
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal.
Guide to the appliance ESW 7010, ESW 7110 a Anti-slip mat b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front.
Guide to the appliance ESW 7020, ESW 7030, ESW 7120 a Anti-slip mat b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front. d Wire rack e Air vents...
Indicator light Indicates that the cups/glasses operating mode is set. l Indicator light Indicates that the function for controlling the drawer via your mobile device is activated. m Optical interface (For your Miele dealer only)
Accessories supplied The accessories supplied with your appliance as well as a range of optional ones are available to order from your Miele dealer (see „Optional accessories“). Wire rack For increasing the loading area (ESW 7020, ESW 7030, ESW 7120).
Before using for the first time Remove any protective wrapping and Heating up the drawer for the stickers. first time Do not remove stickers carrying Heat the empty drawer for at least safety or installation information or 2 hours. the data plate.
The ability to use the Miele app app. depends on the availability of the Miele@home service in your country. The Miele app will guide you as you connect your drawer to your home WiFi The Miele@home service is not network.
Page 18
Before using for the first time Connecting via the app If requested to activate the WiFi on the drawer, proceed as follows: The Miele@mobile app can be used to connect to your network. Switch the drawer off. Install the Miele@mobile app on your ...
Page 19
WPS on your will no longer be able to access the router quickly enough. Repeat the steps drawer. above. Tip: If your WiFi router does not support WPS, please connect via the Miele@mobile app.
Operation Open the drawer. Using the appliance Touch the sensor control to switch Malfunction due to dirty and/or the drawer on. covered sensor controls. Touch the sensor control The sensor controls do not react or repeatedly until the required unintentional switching procedures operating mode lights up.
You will then be able to Use oven gloves when removing the operate the drawer via the dishes. Miele@mobile app. Operation via the sensors has Duration precedence over operation via the app.
Operation Temperature settings A temperature range is assigned to each operating mode. The factory set recommended temperatures are shown in bold. The temperature can be altered in 5 °C increments by touching the sensor. The last temperature selected is automatically activated the next time the drawer is switched on, and this is shown in the control panel (exception: low temperature cooking).
Keeping food warm Tips To maintain your food's optimum quality please note the following: - Place the hot food in pre-heated dishes. To pre-heat dishes, place them in the drawer while it is heating - Do not cover roast or fried food which you want to keep crisp.
Page 24
Keeping food warm Health risk caused by using too low a temperature. Bacteria may develop in the food if the temperature used for keeping food warm is too low. Only use the “Keeping food warm” operating mode. This operating mode is for keeping food warm which has just been cooked and is still hot.
- How the load is arranged loading area using 2 wire racks positioned on the left and right. An - Temperature selection additional wire rack is available to order via the Miele webshop, the Miele Customer Service Department or from your Miele dealer (see “Optional accessories”).
Pre-heat the drawer with the suitable cooking containers for 15 minutes. This If food probes from other Miele built- ensures that the dishes and the interior in appliances are used in the drawer, of the drawer reach the required they may affect the built-in temperature.
Page 30
Low temperature cooking Using the low temperature Tips cooking operating mode - Do not cook the food all the way through. Sear the food again after Select the low temperature cooking. cooking operating mode. - The food can be sliced straight away. ...
Page 31
Low temperature cooking Pre-heat the cooking container for 15 minutes. In this time, rest the food at room temperature. Place the food into the pre-heated cooking container in the compartment. The cooking durations given in the charts are guidelines only. The food can be cooked further if required.
Page 32
Low temperature cooking Lamb cooking chart [min] * [°C] [min] Type of cut Rack of lamb 2–4 45–60 approx. 170 g 2–4 85–100 Rack of lamb 2–4 45–60 approx.
Page 33
Low temperature cooking Fish cooking chart [min] [°C] [min] Fish type Salmon 2 on the skin 45–60 400 g side Trout (whole) 2 per side 15–30 approx. 350 g Cod/skrei No searing 75–90...
Carrying out the networking Networking is carried out via the Miele@mobile app as normal. See “Before using for the first time – Setting up Miele@home” as well as the Miele@mobile app for detailed information about this function. Operation via the sensor controls has precedence over operation via the app.
Cleaning and care Risk of damage due to moisture Danger of burning from hot ingress. interior. The steam from a steam cleaning The interior of the drawer will be hot appliance could reach live electrical after use. components and cause a short Allow the drawer to cool down to a circuit.
Page 37
Cleaning and care Cleaning the drawer front and Cleaning the anti-slip mat interior Damage caused by incorrect cleaning. Malfunction due to dirty and/or Washing the anti-slip mat in a covered sensor controls. dishwasher or washing machine will The sensor controls do not react or damage it.
If, after resetting/replacing the trip switch in the fuse box or the residual current protection device, the drawer will still not turn on, contact a qualified electrician or the Miele Customer Service Department. Noises during operation The noise is from the fan which circulates warm air for even heat distribution.
Page 39
Problem solving guide Issue Cause and remedy The operating mode for warming plates/dishes The dishes are not hot enough. was not selected. Select the correct operating mode. The temperature setting is too low. Select a higher temperature. The vents are covered up. ...
Wire rack useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered from your Miele dealer (see end of this booklet for contact details). For increasing the loading area (ESW 7020, ESW 7030, ESW 7120).
In the event of any faults which you cannot remedy yourself, please contact your Miele dealer. Contact details for your Miele dealer are given at the end of this document. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.
The drawer may only be built in in combination with those appliances quoted by Miele as being suitable. Miele cannot guarantee trouble-free operation if the appliance is operated in combination with appliances other than those quoted by Miele as being suitable. ...
*INSTALLATION* Installation Installation notes The drawer can be used in combination with the following Miele built-in appliances: - all ovens with an appliance front width of 595 mm - all steam ovens with an appliance front width of 595 mm - all coffee machines with an appliance front width of 595 mm - all microwaves with an appliance front width of 595 mm...
*INSTALLATION* Installation Installation dimensions ESW 7010, ESW 7110 All dimensions are given in mm. Combination appliance for niches with a height of 450 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Combination appliance for niches with a height of 590 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Connections and ventilation a View from the front b Mains connection cable, L = 2000 mm c No connections permitted in this area d Ventilation cut-out, min. 1800 mm...
*INSTALLATION* Installation Installation dimensions ESW 7020, ESW 7120 All dimensions are given in mm. Combination appliance for niches with a height of 450 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Combination appliance for niches with a height of 590 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Connections and ventilation a View from the front b Mains connection cable, L = 2000 mm c No connections permitted in this area d Ventilation cut-out, min. 1800 mm...
*INSTALLATION* Installation Installation dimensions ESW 7030 All dimensions are given in mm. Combination appliance for niches with a height of 450 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Combination appliance for niches with a height of 590 mm The furniture housing unit must not have a back panel fitted behind the building-in niche.
*INSTALLATION* Installation Connections and ventilation a View from the front b Mains connection cable, L = 2000 mm c No connections permitted in this area d Ventilation cut-out, min. 1800 mm...
*INSTALLATION* Installation Installation Check that the base on which the drawer will sit is clean and level (use a spirit level). This is important for the appliance to function correctly. Push the drawer into the housing unit until the drawer front is flush with the housing unit and make sure that it is correctly aligned in the unit.
(RCD) with a trip Danger of injury. range of 30 mA. Miele cannot be held liable for unauthorised installation, maintenance and repair work as this can be dangerous to users. Miele cannot be held liable for...
Page 58
H 05 VV-F (PVC- supply during repair or service work. insulated), available from your Miele After disconnection, ensure the dealer. appliance cannot be switched back on by mistake.