Miele EVS 6114 Operating And Installation Instructions page 9

Built-in vacuum sealing drawer
Table of Contents

Advertisement

Correct use
Danger of burning! The sealing bar becomes hot during operation.
The weld seam of the vacuum sealing bag is also heated to a very
high temperature during the sealing process. Do not touch the
sealing bar or the seam immediately after the vacuum sealing
process.
Fire hazard! Do not store any easily flammable substances and
materials in the vicinity of the drawer.
The telescopic runners can support a maximum load of 15 kg.
Overloading or leaning or sitting on the drawer will damage the
telescopic runners.
Damage to the glass lid can cause implosion. Do not place any
objects on the glass lid.
Ensure that the glass lid cannot sustain damage from falling objects.
Do not use the drawer or the glass lid as a working surface, a
chopping surface or as a shelf.
The drawer must be built in so that it can be pulled out completely
and there is sufficient room to open the glass lid. This ensures that
you can see into the vacuum chamber and avoid touching the
sealing bar and weld seam and burning yourself.
When vacuuming liquids, bubbles can form at lower temperatures,
creating the impression that the liquid is boiling. Steam can escape
which can cause the drawer to malfunction.
For this reason only vacuum seal food (liquid or solid) when it has
cooled. Follow the vacuuming process carefully and if necessary seal
the bag early.
Liquid getting into the drawer and into the vacuum pump air
intake valve can result in damage to the vacuum pump.
Moisture in food or drinks can cause corrosion damage in the
drawer. Do not use the drawer to store food or drinks.
Warning and Safety instructions
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evs 6214

Table of Contents