7XV5662-0AD00/DD, 7XV5662-0AD01/DD
Jumper ESF, D4: Selection of framings
This selection is only relevant if the T1 standard has been set.
On delivery, the jumper ESF is plugged in.
Jumper setting ESF:
Jumper setting D4:
Jumper setting B8ZS, AMI:
This selection is only relevant if the T1 standard has been set.
The jumper presetting is "B8ZS".
The following figure shows the jumpers of the RS232/RS485 interface.
Figure 30 Jumper of RS232-/R485 interface
On delivery, the jumper RS232 is plugged in.
C53000-B1174-C205-2
Extended-Superframe-Format
Superframe-Format
Line-code selection
English
63