Parksense Warning Display; Enabling And Disabling Parksense - Jeep Grand Cherokee SRT 2019 Owner's Manual

Table of Contents

Advertisement

Front Distance
Greater than
(inches/cm)
47 inches (120 cm)
Audible Alert
Chime
Arcs-Left
Arcs-Center
Arcs-Right
Radio Volume
Reduced
NOTE:
ParkSense will reduce the volume of the radio, if
on, when the system is sounding an audio tone.
Front Park Assist Audible Alerts
ParkSense will turn off the Front Park Assist
audible alert (chime) after approximately 3 sec-
onds when an obstacle has been detected, the
vehicle is stationary, and brake pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be
selected from the Uconnect System. Refer to
"Uconnect Settings" in "Multimedia" for further
information.
The chime volume settings include low, me-
dium, and high. The factory default volume
setting is medium.
ParkSense will retain its last known configura-
tion state through ignition cycles.
172
WARNING ALERTS FOR FRONT
47-39 inches
(120-100 cm)
None
None
None
None
None
4th Solid
None
None
No
No

ParkSense Warning Display

The ParkSense Warning screen will only be
displayed if Sound and Display is selected from
the Customer Programmable Features section
of the Uconnect System. Refer to "Uconnect
Settings" in "Multimedia" for further information.
The ParkSense Warning screen is located
within the instrument cluster display. It provides
visual warnings to indicate the distance between
the rear fascia/bumper and/or front fascia/
bumper and the detected obstacle. Refer to
"Instrument Cluster Display" in "Getting To Know
Your Instrument Panel" for further information.
39-25 inches
25-12 inches
(100-65 cm)
(65-30 cm)
None
Fast
None
2nd Flashing
3rd Flashing
2nd Flashing
None
2nd Flashing
No
Yes

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with
the ParkSense switch.
the gear selector is moved to REVERSE and the
system is disabled, the instrument cluster dis-
play will display the "PARKSENSE OFF" mes-
sage for as long as the vehicle is in REVERSE.
Refer to "Instrument Cluster Display" in "Getting
To Know Your Instrument Panel" for further
information.
NOTE:
When ParkSense is disabled and the gear se-
lector is moved to the DRIVE position, no warn-
ing message will be displayed.
Less than 12 inches
(30 cm)
Continuous
1st Flashing
1st Flashing
1st Flashing
Yes
When the ParkSense switch is
pushed to disable the system, the
instrument cluster will display the
"PARKSENSE OFF" message for
approximately five seconds. When

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents