Jeep Grand Cherokee SRT 2019 Owner's Manual page 35

Table of Contents

Advertisement

for LO. Turning the heating elements off will
return the user to the radio screen.
• Press the heated seat button
the HI setting on.
• Press the heated seat button
time to turn the LO setting on.
• Press the heated seat button
to turn the heating elements off.
NOTE:
• Once a heat setting is selected, heat will be
felt within two to five minutes.
• The engine must be running for the heated
seats to operate.
• The level of heat selected will stay on until the
operator changes it.
Vehicles Equipped With Remote Start
On models that are equipped with remote start,
the heated seats can be programmed to come
on during a remote start.
This feature can be programmed through the
Uconnect system. Refer to "Uconnect Settings"
in "Multimedia" for further information.
34
WARNING!
• Persons who are unable to feel pain to the
once to turn
skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medi-
a second
cation, exhaustion or other physical condi-
tion must exercise care when using the
a third time
seat heater. It may cause burns even at low
temperatures, especially if used for long
periods of time.
• Do not place anything on the seat or seat-
back that insulates against heat, such as a
blanket or cushion. This may cause the
seat heater to overheat. Sitting in a seat
that has been overheated could cause
serious burns due to the increased surface
temperature of the seat.
Rear Heated Seats — If Equipped
On some models, the two rear outboard seats
may be equipped with heated seats. There are
two heated seat switches that allow the rear
passengers to operate the seats independently.
The heated seat switches for each heater are
located on the rear of the center console.
Rear Heated Seat Switches
You can choose from HI, LO, or OFF heat
settings. Amber indicator lights in each switch
indicate the level of heat in use. Two indicator
lights will illuminate for HI, one for LO and none
for OFF.
• Push the switch
once to turn the HI setting
on.
• Push the switch
a second time to turn the
LO setting on.
• Push the switch
a third time to turn the
heating elements off.
The level of heat selected will stay on until the
operator changes it.
WARNING!
• Persons who are unable to feel pain to the
skin because of advanced age, chronic
(Continued)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents