Removing The Expansion Card - Compaq Presario 5UV430 Maintenance And Service Manual

Compaq Presario Internet PC 5000 Series Computers
PRODUCT DESCRIPTION
REMOVAL AND REPLACEMENT PROCEDURES

Removing the Expansion Card

ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
TROUBLESHOOTING
JUMPER AND SWITCH INFORMATION
Removal
Perform the preparation
1.
Turn the computer on its side (open side facing up)
2.
and locate the expansion card(s).
Remove the screw securing the expansion card.
3.
Pull the expansion card using a gentle rocking motion
4.
from the connector on the system board.
Replacement
Important: The expansion card rear connector
must be properly inserted into the rear chassis
slot to ensure the card is properly seated into
the connector on the system board.
Align the card with connector on the system board
1.
and rear connector slots on the chassis.
Replace the screw to secure the expansion card to the
2.
chassis.
United States
REMOVAL AND REPLACEMENT PROCEDURES
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
procedures.