Removing The Graphics Card - Compaq Presario 5UV430 Maintenance And Service Manual

Compaq Presario Internet PC 5000 Series Computers
PRODUCT DESCRIPTION
REMOVAL AND REPLACEMENT PROCEDURES

Removing the Graphics Card

ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
GRAPHICS CARD
EXPANSION CARD
(Modem or Network
Card)
1394 CARD
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel -
Open the CD Storage
Door)
TROUBLESHOOTING
JUMPER AND SWITCH INFORMATION
Removal
Perform the preparation
1.
Remove the screw securing the graphics card.
2.
Pull the graphics card by using a gentle side-to-side
3.
rocking motion from the AGP slot on the system
board.
Replacement
Align the graphics card with AGP slot on the system
1.
board. Insert the card carefully and firmly into the
connector.
Replace the screw securing the graphics card to the
2.
chassis.
United States
REMOVAL AND REPLACEMENT PROCEDURES
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
procedures.