Change - Siemens SIMATIC HMI Series System Manual

WinCC diagnosis
6.3 ApDiag Menu Commands
Since writing the trace points influences the performance, trace should really be switched off
for normal operation.
Note
End ApDiag
This setting is also retained after ending ApDiag.exe and after restarting the computer.
6.3.3.2

Change

Description
With menu command "Change", you can recognize whether a trace is switched on and change
the current diagnostics level if required:
The current diagnostics level is marked. Select another level and click on "OK" to change the
level.
Note
If no diagnosis is started, selecting "Change" opens no dialog.
168
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA