Siemens SIMATIC HMI Series System Manual page 20

WinCC Installation Notes
1.6 Installation Requirements
Operating systems
Operating system languages
WinCC is released for the following operating system languages only:
● German
● English
● French
● Italian
● Spanish
● Chinese (Simplified, PR China)
● Chinese (Traditional, Taiwan)
● Japanese
● Korean
● Multilingual operating system (MUI version)
Configurations
When using more than one server, all servers must be operated with a uniform operating
system:
Windows Server 2008 R2, 2012 R2 or 2016, uniformly Standard, Datacenter or Enterprise
edition in each case.
Single-user systems and clients
WinCC runs under Windows 7, Windows 8.1 and Windows 10.
Operating system Configuration
Windows 7 Professional Service Pack 1
Enterprise Service Pack 1
Ultimate Service Pack 1
Windows 8.1 Pro
1)
Enterprise
Windows 10 Pro
1)
Enterprise
Enterprise LTSB (Long-Term Servic‐
ing Branch)
Windows Embedded including Service Pack 1
Standard 7
1) Not approved for integrated operation in SIMATIC Manager. If you are using STEP 7 and SIMATIC Manager, use Windows 7
or Windows Server 2008 R2.
You can also run single-user systems and clients in WinCC multi-user systems on Windows
Server 2008 R2 SP1 / 2012 R2 / 2016.
20
Comments
Standard installation
32-bit and 64-bit
Standard installation
32-bit and 64-bit
Standard installation
64-bit
If you are using Simatic Net, observe the information in the
Simatic Net "readme" file.
Only in combination with SIMATIC IPC 4x7D and SIMATIC
IPC 4x7E
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA