Count Of Actions Of Each Transaction - Siemens SIMATIC HMI Series System Manual

WinCC diagnosis
6.3 ApDiag Menu Commands
One transaction is established e.g. for every event-controlled action, for every picture window,
which contains at least one cyclic action, and for global scripts.
Example
===============================================================
1.Applikation: GSC_RT Count of Transactions 1
2.Applikation: ITLG-RT Count of Transactions 0
3.Applikation: PDLRuntimeSystem Count of Transactions 7
4.Applikation: APDiagnose Count of Transactions 0
===============================================================
6.3.5.5

Count of Actions of each Transaction

Description
Menu command "Count of Actions of each Transaction" lists the number of actions contained
in the transactions.
The output is in the following form:
● Name of the Application
● Number of the Transaction
● Number of Actions
At the end of the list, the total sum of actions is output.
Example
===============================================================
Info to Transaktions: Count of Action in Transaction
1.Applikation: GSC_RT Count of Actions in TransAction(0): 15
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(7): 1
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(6): 1
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(5): 1
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(3): 1
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(2): 1
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(0): 19
3.Applikation: PDLRuntimeSystem Count of Actions in TransAction(1): 1
Info to Transaktions: Count of Action in Transaction 40
===============================================================
182
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA