Extended Functionality For Wincc/Webnavigator - Siemens SIMATIC HMI Series System Manual

3.11

Extended functionality for WinCC/WebNavigator

Requirements
WinCC/WebNavigator V7.4 allows access to process pictures with the following Web viewers:
● Internet Explorer as of V10 (32-bit)
● WinCCViewerRT
Information on simplified licensing is available under "Licensing (Page 93)".
WinCCViewerRT supports load balancing
Load balancing on various WebNavigator servers is also supported by WinCC's own Web
viewer "WinCCViewerRT".
Log output on the Web client
The WinCC log system is now fully supported by WinCC/WebNavigator.
You can output logs both on the WebNavigator server and on the WebNavigator client.
Web settings in the SIMATIC Manager
As of WinCC V7.4, SIMATIC Manager offers the option of specifying central Web settings for
the STEP 7 multiproject.
Project-wide "Monitor only" cursor
You can specify a "Monitor only" cursor permanently for the STEP 7 multiproject in the
SIMATIC Manager.
Based on the preset cursor, users on the Web client can see that they cannot operate Runtime.
The setting applies to the Web server in the STEP 7 multiproject.
Publishing process pictures for the Web access of clients
1. In SIMATIC Manager, select the PCs with the project data you want to publish:
– Single-user systems
– OS clients in a multiproject
– Assigned OS servers of the OS clients
2. In the WinCC Web Publishing Wizard, you determine what will be published:
– Process pictures
– Graphics used in the pictures
– C functions
3. Use the Web View Publisher to publish the project data on the Web server.
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA
3.11 Extended functionality for WinCC/WebNavigator
What's new in WinCC V7?
107