Part Names - Christie DS Series User Manual

Introduction

Part names

Projector
(1) Filter cover (113)
The air fi lter and intake vent
are inside.
(2) Elevator feet (x2) (37)
(3) Remote sensors (x2) (30, 99)
(4) Lens hole cover
(5) Indicators (5)
(6) Intake vents
(7) Control panel (5)
(8) AC (AC inlet) (27)
(9) Exhaust vents
(10) Ports (6)
(11) Security bar (26)
(12) Security slot (26)
(13) Safety bar (26)
(14) Battery cover (115)
WARNING
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this projector. Remove all the attachments
including the power cord and cables, from the projector when carrying the
projector.
►Do not look into the lens and the openings on the projector while the light
source is on as the projection ray may cause a trouble on your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam causes high temperature and could result in fi re or smoke.
CAUTION
►Do not touch around the exhaust vents during use or
just after use, since it is too hot.
►Do not attach anything onto the lens except the lens cover of this
projector because it could damage the lens, such as melting the lens.
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Operating Guide
►Do not open or remove any portion of the projector, unless the
(5)
(9)
(2)
(4)
(6)
(9)
(6)
(11)
4
(3)
(10)
(7)
(14)
(13)
(12)
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series
(1)
(6)
(2)
(6)
(8)