User's Manual - Operating Guide - Christie DS Series User Manual

Operating
Correcting the distortion (continued)
 3D KEYSTONE:
When 3D KEYSTONE is pointed at, pressing the
► or ENTER button displays the 3D KEYSTONE
dialog.
This projector is equipped with a test pattern for
3D KEYSTONE. Select TEST PATTERNS with
the ▲/▼ buttons, then press the ◄/► buttons to
switch on and off.
1.
Select SETUP with the ▲/▼ buttons and
press the ► or ENTER button.
2.
Select one of the corners or sides to be adjusted
with the ▲/▼/◄/► buttons and press the
ENTER or INPUT button.
3.
Adjust the selected part as below.
● To adjust a corner, use the ▲/▼/◄/► buttons to adjust the position of the
corner.
● To adjust the upper or lower side, use the ▲/▼ buttons to adjust the
distortion of the side.
● To adjust the left or right side, use the ◄/► buttons to adjust the distortion
of the side.
● To adjust another corner or side, press the ENTER or INPUT button and
follow the procedure from step 2.
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS

User's Manual - Operating Guide

42
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series