Christie DS Series User Manual page 125

Regarding the indicator lamps
Regarding the indicator lamps (continued)
Indicator Status
Blinking In Green 1 time
Blinking In Red 1 time
Red
Blinking In Red 2 ～ 3 times
Red
Blinking In Red 1 time
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Operating Guide
PIN LOCK or TRANSITION DETECTOR
Orange
function is active.
See SECURITY menu > PIN LOCK or TANSITION
DETECTOR(
If the same indication is displayed after the remedy,
contact your dealer or service company.
It is time to clean the air filter.
Turn the power off immediately, and clean or change
Green
the air filter referring to the section Cleaning and
replacing the air filter. After cleaning or changing
the air filter, reset the filter hours.
After the remedy, restart the projector.
The air filter is clogged or dirty.
Check and clean the air filter.
Make sure the power cord is not plugged in, then
allow the projector to cool sufficiently.
See the section "The interior portion has become
heated" (
Green
NOTE • The FILTER indicator might light up
in red when something blocks the intake vents
even though the air filter is clean.
• The FILTER indicator might light up
differently from other indicators or display
messages related to cleaning the air filter.
Follow the prompt that is displayed earlier.
The internal temperature is rising.
Turn the power off, and allow the projector to cool
Green
Red
down at least 20 minutes. After having confirmed the
following items, turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 45°C?
Description

108, 109, 112).

124).
123
(

113)
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series