Christie DS Series User Manual page 75

Item
GEOMETRY
CORRECTION
(continued)
LIGHT & FILTER
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Operating Guide
TEST PATTERNS
Select TEST PATTERNS with ▲/▼ buttons.
Displayed pattern [Off/1/2/3/4/5/6] can be switched with ◄/► buttons.
PATTERN 1: Frame
PATTERN 2: Red Grid
PATTERN 3: Green Grid
PATTERN 4: Blue Grid
PATTERN 5: Vertical 9 steps
PATTERN 6: Horizontal 9 steps
OFF: Displays the input signal.
Selecting this item displays the LIGHT
& FILTER menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to
execute the item.
LIGHT OUTPUT
Using the ▲/▼ buttons switches the LIGHT OUTPUT.
NORMAL ó LIGHT 75% ó LIGHT 50% ó QUIET MODE
• When the ambient temperature is around 35 to 45°C, the
brightness of light source is reduced automatically.
• When NORMAL is selected, you can change the brightness.
• LIGHT 75% and LIGHT 50% are specialized modes for long life of
the light source. They restrict the brightness of a light source and
perform appropriate cooling for the long life of a light source.
• QUIET MODE is a specialized mode for low noise. It restricts the
brightness of a light source.
• The brightness of the light source may be reduced depending on
the direction of the projection.
LIGHT SOURCE HOURS
The light source hours is the usage time of the light source.
Description
73
SETUP menu
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series