Setting Up A #Hashtag Print Service - Mitsubishi Electric SmartD90-EV User Manual

Appendix

Setting up a #Hashtag print service

1.- Setup the SmartD90 to get Internet access. You can setup a Wireless or Wired connection. To setup
the SmartD90:

Log in to the SmartD90 settings

From the Start page, click "stop service", select Top menu and

To setup a wireless connection to the network that will provide Internet access:
Click set to save changes:
System settings.
Smartphone setup to
share Internet access
Router as access point
to provide Internet
Type SSID and Pass as is setup at the device that
provides Internet connection.
If the router doesn't provide DHCP, then disable
DHCP at SmartD90 System settings and type the
IP provided by the router.
40
i