Mitsubishi Electric SmartD90-EV User Manual page 34

Apply print order validation
(Print orders must be validated
from "Order Info" menu.
on the "Edit"" button -> Click on the "Enable/Disable" toggle button to
set "Enable"

Click "Set" button to apply and save the changes

Go back to Start page and "start" the service.

Maintenance (admin) -> Stop Service -> Top Menu -> HotFolder
Setting -> Select the folder used by the print service in use ->
Validation -> Click on "Enable/Disable" toggle button to set
Validation "Enable"

Click "Set" button to apply and save the changes

Go back to Start page and "start" the service
34
i