Hotfolder Setting - Mitsubishi Electric SmartD90-EV User Manual

SETTINGS

Hotfolder setting


Enable / Disable: If DISABLE is selected the HotFolder can not be used for any service.

Name: The alias for the HotFolder. Type a name according to the printing format for a better
understanding and more easy service setup.

Print Size: Select from the list one of the predefined printing sizes. If "Variable" is selected, then choose
"Width" between 1550/1852 pixels and input "Height" accordingly.

Quality: Printing quality:
Auto: The printer selects the print mode depending on the image content. For dark images it will use
"Ultra fine" mode to print more detailed images.
Fine: For faster printing.
Ultrafine: For a more detailed print out.

Finishing: Print out Glossy / Mate

White Border: Enable/Disable a white border around the printed image.

Copies: Number of copies for each image sent to the HotFolder

Layout: Set "Variable" to customize the print out using the Canvas item and the X, Y W, H values. Set a
predefined layout to set the image area to a predefined size and position.

Canvas: Sets portrait or landscape orientation for the canvas

X, Y, W, H: Defines the area where the image/photo will be fitted. If the values are blank, the image
area will match the print size (canvas).
X: Horizontal start position for the image
Y: Vertical start position for the image
W: Width of the image.
H: Height of the image

Fit Mode:

Frame: Allows the selection of a frame (*.png file) to decorate the print out.
None: No frame is selected
Frame select: Enable the list to select the available frames.
Rotation: This value will enable the frame rotation function. This function has its own setup menu to
select the frames and the rotation frequency for each frame.

Text: Click the "Edit" button to access the Text edit page.

Validation: Enable/disable - Toggle value. If Enabled, the images sent to the HotFolder will remain
"Paused" until printing is "Validated" from the "Order Info" page.

Set: Click "Set" to apply and save the changes.
The HotFolder Setting item displays the basic settings for each one of the existing
HotFolders. To edit the settings of a specific HotFolder, click on its ID

Hotfolders ID 101 to 120 are used for Easy print service.

Hotfolders ID 201 to 206 are used for Fun print service.

Hotfolder 300 is used for the Smart Print application for Android and
iOS smartphones

Hotfolders 301 to 320 are used for ftp and smb services.

Hotfolder 360 is used for #Hashtag service.

ID: It shows the ID number of a HotFolder. The ID is a unique
identification number that cannot be edited.

Name: An alias for the HotFolder. The name can be edited for a better
identification of the printing format.

Print Size: The selected print size for the images sent to the
HotFolder.

Copies: The number of copies for each image sent to the HotFolder

Status: If the HotFolder is Enabled or Disabled.
20
Stop Service to access this item