Mitsubishi Electric SmartD90-EV User Manual page 18

SETTINGS
Top menu : System ready
ORDER INFO

Order Number: It shows the order ID number.

Order Date: The system date and clock when the order was received.
To set up system date and clock go to: Top Menu -> System Setting ->
date & Time setting

Service: Shows the "Hot Folder" name used by the print service.
TARListener (for Kiosk Prints app), Polaroid, Instagram, ...

Print Size: Size of the printed out. 10x15, 15x20, ...

Prints: Number of prints included in the order.

Completed Prints: Number of prints that are completed at a certain
moment.

Status: It can be shown 3 different status
•
Printing: It is shown while the order is being printed
•
Paused: It is shown if the order is pending of validation.
•
Completed: It is shown once the printing order has been
finished
PRINTER INFO

ID: Not used

Model: CP-D90D in the image

Status: The status of the printer device at a certain time: Ready, Door
Open, Error, ... Press "Refresh" button to update the status,

Media: Type of media loaded. In the image 15x10(6x8") for CK-D868

Remain: Remaining photos. In the image 126 remaining.
SYSTEM INFO
18
i