System Setting - Mitsubishi Electric SmartD90-EV User Manual

SETTINGS

System setting


Login Setting: admin and user
names can not be changed.
admin: Set the Password to
-
enter the admin menu. Full
access to all SmartD90EV setting.
User name: admin (cannot be
changed)
Password: admin - default value.
(It can be changed)
user: Set the Password to enter
-
the user menu. Some items of
"tart page and Top menu are
not available
User name: user (cannot be
changed)
Password: user - default value.
(It can be changed)

Auto Start: Enable/Disable. If
Enable, the selected print service
will start automatically after
switch ON the SmartD90EV. If
Disabled, the SmartD90EV will be
started with stopped services.

Auto delete: Deletes the original
images and compositions after
printing.

Language: Sets the default
language for the EasyPrint,
FunPrint services and
maintenance menu.

Date & Time Setting: Edit
the System date & Time

Set: Click "Set" to apply
and save the changes.
•
Enable Bridge mode to allow
applications Access to
Internet (i.e. Hashtag Service)
25
Stop Service to access this item
Internal Wi-Fi (AP):
•
SSID: Sets the SSID name for the print service
applications. Default name is "#PhotoPrint"
•
Pass: Sets a Password for the Wi-Fi connection. If blank,
then password is disabled. Password must have 8 char
min.
•
Channel: Sets the RF cannel for the Internal Wi-Fi
If you set a password for the Wi-Fi, keep it in a safe and
known place. If you forget this password the system may
result unusable and require a service action.
Internal Wi-Fi (Client):
•
Enable/disable the internal Wi-Fi client
•
SSID: Sets the SSID name of the network to connect.
•
Pass: Sets a Password of the network to connect
i