Menu 11 – Motor Speed, Slow Speed Area
Menu No.
Motor Speed, Slow Speed
Area and Reverse Time
11.1
11.2
11.3
Open and Close Slow Speed
11.4
Open Slow Speed Area
11.5
Close Slow Speed Area
11.6
11.7
11.1 & 11.2 Open and Close Speed
This sets the speed at which the gates/doors will travel. If the gate/door is travelling too fast reduce this
value.
11.3 Slow Speed
This sets the speed at which the gates/doors will travel in the slow speed region. If the gates/doors is
travelling too slow increase this value.
11.4 & 11.5 Slow Speed Area
This sets the slow speed travel area. If you want more travel time for the slow speed area increase this
value.
11.6 Obstruction Stop Reverse Delay Time
This sets the stop and reverse delay time when the gates/doors hits an obstruction.
26
and Reverse Time
Open Speed
Close Speed
Stop Reverse Delay
Exit
Double Gate & Door Controller
Factory
Adjustable
Default
80%
50% to 125%
70%
50% to 125%
50%
35% to 65%
4
5
0.4 seconds
0.2 to 2.5 seconds
1 to 12
1 to 12
with Eclipse
Operating System (EOS)
®
Need help?
Do you have a question about the Eclipse MC and is the answer not in the manual?