Setup I-Learning Steps - Elsema Eclipse MC Operating

Setup i-Learning Steps:

1. The i-Learning setup can always be interrupted with the stop button or by pressing the Master
Control knob.
2. Enter Menu 13 to start i-Learning or new control cards will automatically prompt you to do the
i-Learning.
3. Look at the LCD and follow the instructions displayed.
4. The MC control card will open and close the gates or doors several times to learn the load and travel
distances. This is the auto profiling using latest intelligent technology.
5. Buzzer will indicate learning was successful. If there was no buzzer check all electrical wiring
including the power supply then go back to step 1.
6. If you hear the buzzer the gate or door is ready for use.
www.elsema.com 11