Introduction - Pro-Cut PFM 9.2 DRO Technical Manual

INTRODUCTION

WELCOME TO THE PRO-CUT TEAM.
Congratulations on your purchase of the PRO-CUT 9.2 DRO, the world's fastest and most accurate computer-
ized on-car brake lathe.
For many years, on-car lathes were used only for rotors that were difficult to remove. Due to current trends,
virtually all auto manufacturers now require or recommend the use of on-car technology to match every rotor
to every hub. By matching a rotor to the hub, the chance of a vehicle returning for a lateral run-out induced
brake pedal pulsation is virtually eliminated. There is simply no better way to refinish and match a rotor than
with the patented ROTOR MATCHING SYSTEM.
The following pages are designed to guide you through set-up, operation, and maintenance of your lathe. We
recommend that technicians take the online training in our TrainSmart section of the website:
http://www.procutusa.com/trainsmart.aspx
If you have any questions along the way, please call us. Our technical support team is standing by from 8
a.m. to 5 p.m. Eastern time. Or browse our website for technical information and tips: www.procutusa.com
PG / 800.543.6618
ØØ8