Pro-Cut PFM 9.2 DRO Technical Manual page 70

SERVICE CORRIDOR CONCEPT
During the cut, the GPM (gage pick-up module) unit mounted under the cutting head gear box listens for
16.
the cut and will cause the "Cut in Progress" alert to be displayed in the yellow command bar.
17. Once the cutting tips clear the rotor and the cut is complete the "Cut Completed" message will be dis-
played in the command bar.
18.
NOTE:
SAVE RESULT
BUTTON
PG / 800.543.6618
Ø70
CONTINUED
You may select the "save result" button which will
bring up the "Select Wheel" dialog box giving you
the opportunity to confirm the corner of the vehicle
you just completed and allowing you to save the
results.
If you do nothing, the "Select Wheel" box will pop
up automatically after approximately 30 seconds.
The saved data is now displayed on the screen in
the appropriate corner of the vehicle. Confirm the
correct wheel and select "okay".
NOTE:
Pressing "Save Result" opens the "SELECT WHEEL" dialog box.