Pro-Cut PFM 9.2 DRO Technical Manual page 61

SERVICE CORRIDOR CONCEPT
LEFT-REAR Wheel selected with LRO / TK specs displayed on screen»
SCREEN
Follow the instructions given on the yellow command bar
7.
in the center of the screen.
8.
Select the proper adapter and attach to the vehicle's hub;
The part number of the correct adapter will be displayed.
If you would like visual identification of the adapter, sim-
ply touch the part number and an image will be displayed.
Connect the lathe to the adapter per the instructions on
9.
page 19.
CONTINUED
WWW.PROCUTUSA.COM PG / Ø61