Pro-Cut PFM 9.2 DRO Technical Manual page 48

THE GAGE PICK UP MODULE 50-1148
The Gauge Pickup module has two jobs. It decodes the
data from the slide sensor (aka the gauge) and sends it to
the main lathe computer for display. When used in a full
GYR package, it also detects when a cut is being made (the
pickup).
FEATURES:
1. Mounting holes
8 pin connector
2.
3. 6 pin connector
PG / 800.543.6618
Ø48
2
FOLD OVER
BEFORE ASSEMBLY
3
1