Gps Settings - Maxon DataMax MA100-1010 User Manual

Heartbeat The time interval to send heart beat packet. Valid only
Interval when you choose UDP(DTU) or TCP(DTU) protocol .

GPS Settings

Enable GPS
GPS Output
Interface
GPS Center
Address
GPS Center
Listening Port:
GPS Information
Update Interval
GPS Speed
Threshhold
Device ID
Serial Port
settings
Enable GPS: Enable or disable GPS function
GPS Output Interface: This item selects the GPS output interface
including network and serial port
GPS Center Address: The GPS center's IP Address or domain name
GPS Center Listening Port: The GPS center's listening port.
GPS Information Update Interval (Seconds): The time interval between
two GPS information updates. Unit is seconds.
When GPS output interface is serial port, we should set the following serial
port settings:
Enable or disable GPS function
You can send GPS data to the Network or the serial
interface
The GPS Service Center IP address or domain name
GPS Service Center listening port
The time interval between two GPS information
updates. Unit is seconds.
GPS Speed Threshhold
A device ID that can be sent with the GPS data
Here you can setup the serial port baud rate, databit,
Parity, Stopbit and Flow control settings.
Page - 40 -