Static Routes - Maxon DataMax MA100-1010 User Manual

Static Routes

Static routes allows you to add an entry to the router routing table. This
can be used if you would like to configure a VPN tunnel or forward
packets to a particulate IP address on your LAN.
Press "Add" button to start add a custom static route:
Route Name
Destination IP
Address
IP Subnet Mask
Gateway IP
Address
Metric
If you want to delete a custom static route, choose this item and press
"Delete" button.
static route's name, used for identification purpose
only
The packet's destination IP Address
Is the subnet mask for this destination IP. If the
destination is a single host, this should be set to
255.255.255.255
The gateway IP Address for this route
A number between 1 and 15, which represents the
number of routers between your network and the
destination.
Page - 28 -