Backup Settings - Maxon DataMax MA100-1010 User Manual

System
Firmware Version
Module
Signal
Network
Internet Port
Status
IP Address
Gateway
Domain Name
Server
LAN Port
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name
Region
Channel
Mode
Wireless AP

Backup Settings

You can save your router configuration by clicking on the backup
button; this will prompt you to save the configuration file to your local
hard drive
Note: Do not edit the saved file. If the file used to restore configuration is
not correct, the router will restore to a factory default setting.
Software version information
The Wireless module used to connect to the internet
Packet protocol type TCP, UDP or TCP/UDP
Packet's source port
WAN connection Online/ Offline
WAN IP Address
WAN Gateway Address
The ISP DNS
LAN IP Address
Enabled/ Disabled
Subnet mask of the LAN IP Address
SSID name
Country
Frequency that the WIFI operates on
802.11g and 802.11b
Wireless AP is enabled/Disabled
Page - 30 -