Configuration And Management - Maxon DataMax MA100-1010 User Manual

C o n f i g u r a t i o n a n d M a n a g e m e n t
Datamax is configured via a web interface. In order to access the
Datamax web interface you will need a computer with a spare Ethernet
LAN port. The LAN card configuration should have the Internet Protocol
TCP/IP set to obtain an IP Address automatically and obtain DNS server
address automatically.
To check these settings go to your LAN adaptor properties and check
your Interment Protocol TCP/IP settings, it should look as follows:
Connection Steps:
1. Connect the Ethernet cable supplied with your router to your
computer Ethernet LAN port
2. Your computer will get an IP address from the Datamax DHCP
range automatically.
Page - 17 -