Attaching The Wrist Strap - X-Rite SP60 Series Getting Started

G E T T I N G S T A R T E D

Attaching the Wrist Strap

Connection Location
6
The shoe must also be open to gain access to the battery
compartment when the battery requires replacement.
To Unlatch the Instrument Shoe:
1. Hold the shoe next to the instrument housing and lift
upward on the spring-loaded latch.
2. Slowly allow the shoe to pivot toward the back of the
instrument and release the latch.
Shoe Latch
To latch the Instrument Shoe:
1. Simply close the shoe to the instrument. The latch is
spring-loaded and automatically latches to the shoe catch.
A security wrist strap is included to safeguard against
accidentally dropping of the instrument. The strap is
attached to the instrument by simply securing the clasp to
the designated location on the back of the housing. Adjust
the strap by sliding the sleeve to tighten around your wrist.
Lift Upwards
Strap Clasp
Adjustable Sleeve