Gs / N; Gs P N - SPRT SP-T5 User Manual

• If x*y is off-limit, then the command is forbidden.
• d means the image data. 1 print, 0 not print
• use this command to define the downloaded bit-image, use
command GS/n to print the downloaded bit-image.
• In the following circumstances ， clear the definition of
downloaded bit-image.
1. run ESC @ command
2. printer is reset and the power is off.

4.4.3 GS / n

[Name]: Print downloaded bit-image
[Format]：
[Description]：Use n specified mode to print the down-loaded
bit-image which is defined by GS * command.
Select the following mode for n;
n
0
1
2
3

4.4.4 GS P n

[Name]: Print prestored bit-image
[Format]：
ASCII
Hexadecimal 1D 2F n
Decimal
Enlarging mode
normal
Double height
Double width
Double height & width
ASCII
GS / n
29 47 n
GS P
37
n