SPRT SP-T5 User Manual page 24

[Description]:Print and feed paper to the position of black
mark, if there is no black mark, then feed paper about 30mm
and stop, the criterion for black mark please refer to
Appendix B. This command is only valid for black mark mode
printer. The user can enable or disable black mark by T5
Setting Tools. If in the mode of black mark disabled, this
command is invalid.
[Reference]: LF, CR, ESC d, ESC J
4.1.4 LF
[Name]: Print and feed line
[Format]:
[Description]: Prints the data in the print buffer and feeds one
line based on the current line spacing.
[Notice]: This command sets the print position to the
beginning of the line.
4.1.5 CR
[Name]: Print and carriage return
[Format]:
[Description]: The command functions the same as LF.
Decimal
ASCII
Hexadecimal
Decimal
ASCII
Hexadecimal
Decimal
12
LF
0A
10
CR
0D
13
24