Syslog - Vertiv VP8841 Manual

Vertiv Intelligent Rack PDU
A test trap may be sent by clicking on the Test icon next to the Host IP address. Trap settings can also be
updated/changed by clicking the Modify icon next to the Host IP address.

5.3.7. SYSLOG

Syslog data can be captured remotely but must first be setup and enabled via the Syslog page.
5.3.8. ADMIN
The Admin page allows the administrator of the device to save their contact information along with the de-
vice description and location. Once the info is saved by an administrator, other (non-administrator) users
can view the information. Also, the System Label can be modified on this page. This label is typically
shown in the title bar of the web browser's window, and/or on the browser tab(s) currently viewing the de-
vice.
NOTE
This function is primarily only useful for diagnostic purposes, and should
normally be left Disabled unless advised to enable it by Vertiv technical sup-
port for troubleshooting a specific issue
Figure 3-37 Syslog Configuration Page
NOTE
This information is strictly for the users' and administrator's convenience.
The unit will not attempt to send emails to the "Administrator Email" address
and this address cannot be chosen as the Target of an Event Action when
configuring an Alarm or Warning Event.
Page 71