Alarms & Warnings - Vertiv VP8841 Manual

Vertiv Intelligent Rack PDU
Resetting Energy (kWh) and Current (Minimum and Maximum) Values
1. Click the Operation icon.
2. Select the operation you wish to perform.
3. Click Submit to execute operation.
5.2.1.2. ALARMS & WARNINGS
The Alarms & Warnings Page allows the user to establish alarm or warning conditions (hereafter referred
to as "Events") for each power and circuit reading. Events are triggered when a measurement exceeds a
user-defined threshold, either going above the threshold ("high-trip") or below it ("low-trip"). Events are
displayed in different sections, based on the device or measurement the Event is associated with. Each
Event can have one or more Actions to be taken when the Event occurs.
1. State: Shows the status of each Event.
•
Empty: No alert condition.
•
: This symbol indicates that this particular "Warning" Event has been tripped. A tripped Warning
Event displays in orange.
•
: This symbol indicates that this particular "Alarm" Event has been tripped. A tripped Alarm
Event displays in red.
•
: This symbol indicates that this Event has been acknowledged by user after being tripped. It
will remain this way until the condition being measured by this Event returns to normal (i.e. ceases to
exceed the trigger threshold for this Event).
2. Configuration: Add/Delete/Modify Alarms & Warnings.
•
: Add new Alarms & Warnings.
•
: Modify existing Alarms & Warnings.
Figure 3-18 Resetting Energy and Current Values
Figure 3-19 Alarms and Warnings Page
Page 58