Final Checkout - Vertiv VP8841 Manual

Vertiv Intelligent Rack PDU Page 75

6.1. FINAL CHECKOUT

6.1.1. TECHNICAL SUPPORT
6.1.1.1. RESETTING PDU
Should the PDU lose communication, the processor may be manually rebooted without affecting power to
the outlets. Pressing the reboot button on the face of the IMD will cause the processor to reboot. The
web interface will remain off-line during boot up. For more information, see the Interchangeable Monitoring
Device section of this manual.
6.1.1.2. SERVICE AND MAINTENANCE
No service or maintenance is required. Do not attempt to open the PDU or you may void the warranty.
There are no serviceable parts inside the PDU other than the field replaceable Interchangeable Monitoring
Device (IMD). It is recommended that power be removed from the unit before installing or removing any
equipment.
The Interchangeable Monitoring Device is designed to be field replaceable by qualified service person-
nel only. The IMD is designed to be replaced while the PDU is still connected to AC Mains power.
Please refer to the IMD section of this document for removal and installation instructions.
6.1.1.3. MORE TECHNICAL SUPPORT
VertivCo.com/geist
Phone Support
•
1.800.432.3219
Email: support@VertivCo.com or contact your distributor
Technical Support Form: VertivCo.com/Tech-Support