Web Server - Vertiv VP8841 Manual

Vertiv Intelligent Rack PDU

5.3.3. WEB SERVER

The unit's Web Server configuration can be updated on the Web Server tab of the System menu.
•
HTTP Interface: Enables/disables access via HTTP. HTTPS interface will always be enabled. Availa-
ble options are: Enabled or Disabled. It is not possible to disable the web interface completely.
•
HTTP/HTTPS Server Port: Allows you to change the TCP ports which the HTTP and HTTPS services
listen to for incoming connections. The defaults are port 80 for HTTP and 443 for HTTPS.
NOTE
Any changes you make to the Network settings will take effect once the
Save button is clicked! If you have changed the IP address or
HTTP/HTTPS ports, it will appear as if the unit is no longer responding be-
cause the browser will not be able to reload the web page. Just stop or
close the browser window, then type in the new IP address into the brows-
er's address bar, and the unit will be accessible.
Figure 3-29 HTTP Configuration Page
Page 66