Emerson Micro Motion Quick Start Manual page 4
Ethernet/ip module
Hide thumbs
Also See for Micro Motion:
- Configuration and use manual (212 pages) ,
- User manual (76 pages) ,
- Installation manual (74 pages)
Table of Contents
Advertisement
Quick Start Guide
Figure 1-3: Snap off
3. Wire the EtherNet/IP Module to power (24 VDC).
Figure 1-4: Power connections on the EtherNet/IP module
4. Install the Modbus serial cable between the EtherNet/IP Module and
the RS-485 terminals on the transmitter (or the I.S. barrier, if present).
4
A. 24 VDC
B. Ground
2
1
Micro Motion EtherNet/IP Module
January 2019
Advertisement
Table of Contents
