Kramer VS-8 Series User Manual page 29

push buttons on each remote controller separately. You cannot
simultaneously lock or unlock all the remote controllers from one remote
controller, or from the PC. When all switchers and remote controllers are
locked, the front panel switcher push buttons are inoperative. By design, only
1
specific remote controller push buttons will function, enabling the operator
to execute the unlock commands.
Section 7.2.3.1 describes how to lock the switcher and section 7.2.3.2
describes how to unlock the switcher. For a concise summary of the
locking/unlocking push button sequence, refer to Table 13 on page 26.
7.2.3.1 Locking Switchers
To lock a specific switcher, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the appropriate MACHINE IN SYSTEM # button on the remote
controller. The MACHINE IN SYSTEM # button blinks.
3. Press the STO button on the remote controller. The specific switcher
locks and the INPUT STATUS Display numbers on the switcher appear
dimmed.
To lock all switchers, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the ALL button on the remote controller. The ALL button blinks.
3. Press the STO button on the remote controller. All the units lock and the
INPUT STATUS Display numbers on the switchers appear dimmed.
To lock a remote controller, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the STO button on the remote controller. The remote controller
locks and the INPUT STATUS Display numbers on the remote
controller appear dimmed
1 That is, TAKE, RCL, and ALL
2 All other remote controllers remain unlocked
Operation
2
.
25