AUTEC LSDCMPPT User Instructions page 9

Power saving model 2: split into 5 levels, each level reduce 10%
10.8-11V:90% on base of original setting
10.6-10.8V:80% on base of original setting
10.4-10.6V:70% on base of original setting
10.2-10.4V:60% on base of original setting
10-10.2V:50% on base of original setting
Power saving model 1: split into 5 levels, each level reduce 15%
10.8-11V:85% on base of original setting
10.6-10.8V:70% on base of original setting
10.4-10.6V:55% on base of original setting
10.2-10.4V:40% on base of original setting 40%
10-10.2V:25% on base of original setting 25%
Attention:
1. For both model 1 or model 2, when the electricity is below 50mA, the
battery will operate.
2. Start Saving Power and Super Saving Power must be above Under-voltage,
Start Saving Power voltage must be above Super Saving Power voltage
settings.
3. Only G3 has "model 1" & "model 2" options. G4 and G5 are "power saving
models", same as "model 1".
Technical Sales / Customer Service:
31328 Via Colinas Suite 102 •
User Instructions for PRLCD Remote
+1-818-338-7788
Westlake Village, CA 91362 USA
9 / 11
• Email:
sales@autec.com
•
www.autec.com