AUTEC Dynamic Series Original Instructions Manual
Fjr transmitting unit
Hide thumbs
Also See for Dynamic Series:
- User manual (36 pages) ,
- Instruction manual for the use and the maintenance (20 pages) ,
- Original instructions manual (12 pages)
Advertisement
Original instructions
1 Description ........................................................................................................... C - 2
2 Technical data ...................................................................................................... C - 3
3 Technical data sheet ........................................................................................... C - 3
4 Plates .................................................................................................................... C - 4
5 Light signals ........................................................................................................ C - 4
6 Malfunction signalled by the transmitting unit ................................................. C - 6
AUTEC
LIFJRE00-01.fm
DYNAMIC SERIES
Part C: FJR transmitting unit
INDEX
Dynamic Series
Part C: FJR transmitting unit
ENG
Advertisement
Related Manuals for AUTEC Dynamic Series
Summary of Contents for AUTEC Dynamic Series
-
Page 1: Table Of Contents
Original instructions DYNAMIC SERIES Part C: FJR transmitting unit INDEX 1 Description ......................C - 2 2 Technical data ...................... C - 3 3 Technical data sheet ................... C - 3 4 Plates ........................C - 4 5 Light signals ......................C - 4 6 Malfunction signalled by the transmitting unit .......... -
Page 2: Description
Description C - 2 1 Description actuators connector for wire control (if present) (joysticks, selectors, pushbuttons) STOP pushbutton display or LED (if present) LEDs START pushbutton S-KEY (electronic starting key) Dynamic Series Part C: FJR transmitting unit... -
Page 3: Technical Data
A copy of the technical data sheet must always be kept together with this manual (always keep a copy of this data sheet for administrative purposes). The wiring of the receiving unit outputs must always reflect the wiring indi- cated in the technical data sheet. AUTEC Dynamic Series LIFJRE00-01.fm Part C: FJR transmitting unit... - Page 4 The transmitting unit is switched off. The transmitting unit is switched on and there is no ... blinks fast radio link. The radio remote control is started and the radio link is ... blinks slowly present. Dynamic Series Part C: FJR transmitting unit...
-
Page 5: Light Signals
An acoustic signal is also heard when the red LED is illuminated. b. After this signal, the transmitting unit switches off. - If it has 4 LEDs, the side LEDs are red and provide information coming from the machine (Data Feedback function). AUTEC Dynamic Series LIFJRE00-01.fm Part C: FJR transmitting unit... -
Page 6: Malfunction Signalled By The Transmitting Unit
** Procedure to save the address - press the STOP pushbutton - press the START pushbutton and do not release it until the green LED switches off - unlock the STOP pushbutton Dynamic Series Part C: FJR transmitting unit...