AUTEC AIR Series Instruction Manual For The Use And The Maintenance
Radio remote control receiving unit
Hide thumbs
Also See for AIR Series:
- Instruction manual (52 pages) ,
- Instruction manual for the use and the maintenance (44 pages) ,
- Original instructions manual (28 pages)
Related Manuals for AUTEC AIR Series
Summary of Contents for AUTEC AIR Series
- Page 1 LIURPD002_eng-00 Instruction Manual for the use and the maintenance of the Radio Remote Control Original instructions Part D: HACRP8 (Model RPD) Receiving Unit AIR SERIES...
- Page 3 ACCORDINGLY, IT IS THE RESPONSIBILITY OF THE MACHINE MANUFACTURER ON WHICH THE AUTEC REMOTE CONTROL IS INTENDED TO BE INSTALLED, to perform an in-depth and accurate risk assessment to determine if the Autec Radio Remote Control is suitable for operating a Machine in conditions of safety and operational effectiveness,...
- Page 4 It is also the responsibility of the Manufacturer and of the design professionals of the Machine on which the Autec Radio Remote Control is to be installed and used to be certain that the structure, condition, organization and markings of the Machine as installed at the facility is appropriate for and will allow for the safe and reliable use and control of the Machine through the Autec Radio Remote Control interface.
- Page 5 Machine operated by or through the Autec Radio Remote Control are fully and properly educated and trained by qualified Personnel in the proper and safe use of the Autec Radio Remote Control and of the Machine, including without limitation complete familiarity...
-
Page 6: Table Of Contents
9.2 Mounting and fastening the Receiving Unit in the best position ......17 9.4 Wiring ....................... 18 9.3 Positioning the antenna ..................18 10 Maintenance ......................19 11 Malfunction signalled by the Receiving Unit ............19 12 Decommissioning and disposal ................19 LIURPD002_eng-00 AUTEC... -
Page 7: Information On The Use Of Instructions
(Part A) of the Manual provided with the Radio Remote Control. Structure of the Instruction Manual The Manual for the use and maintenance of Autec Radio Remote Controls consists in different parts, that altogether form the Manual; the Manual must be read carefully, understood and applied by the Radio Remote Control's Owner, User and by all those Persons that, for any reasons, may operate with the Radio Remote Control or with the Machine where it is installed. - Page 8 Receiving Unit. Usage and maintenance instruction as a whole are to be considered as an integral part both of the Autec Radio Remote Control and of the Machine, system, device or Machinery system where the Radio Remote Control is installed.
-
Page 9: Caption And Terminology
Caption and terminology Contact Autec if any of the instructions, symbols, warnings or images are not clear and understandable, or if you have doubts or questions. In this part of the Manual, the terms listed below have the same meaning explained in the... -
Page 10: To Whom The Instructions Are Addressed
Regulation for the storage of instructions are described in the paragraph with the same title in the general part: please refer to that part. Intellectual property Restrictions connected to intellectual property are described in the paragraph with the same title in the general part: please refer to that part. LIURPD002_eng-00 AUTEC... -
Page 11: Brief Product Presentation
Brief product presentation Series, Radio Remote Control and Unit The object of this part of the Manual is the HACRP8 (Model RPD) Receiving Unit of an Autec Air series' Radio Remote Control. Autec Air series' Radio Remote Controls are designed to be used on Machines and provide a command interface to their command and control system, to be used from an appropriate distance and position. -
Page 12: Description Of The Receiving Unit
- Togliere l’alimentazione e attendere 10 secondi in caso di apertura. Power supply protection fuse Connector for buzzer DIP switches Red indicator light Technical data plate Identification plate Radio module and address key STOP contacts protection fuses Plug or cable gland Buzzer (optional) LIURPD002_eng-00 AUTEC... -
Page 13: Technical Data
- Before switching on please read the user manual. - Adhere to safety rules. - Disconnect power source and wait 10 seconds before opening. - Prima dell'accensione leggere il manuale d’uso. - Attenersi alle norme di sicurezza. - Togliere l’alimentazione e attendere 10 secondi in caso di apertura. AUTEC LIURPD002_eng-00... -
Page 14: Technical Data Sheet
The Receiving Unit is off. The Receiving and Transmitting Unit do not The red indicator light blinks once every 5 seconds. communicate. The Unit is ready to receive commands sent by the The red indicator light blinks fast. Transmitting Unit. LIURPD002_eng-00 AUTEC... -
Page 15: Operation
The normal position of DIP switch 2 is OFF. This position must not be modified. Command outputs The relation between the command sent by the Transmitting Unit and the output activated on the Receiving Unit is provided in the Technical Data Sheet. AUTEC LIURPD002_eng-00... -
Page 16: Installing The Receiving Unit
- Observe and comply with all applicable Laws, Regulations and Standards, even local. - Operate the Autec Radio Remote Control only in accordance with this Manual and all of its Parts, and with all Autec warnings and instructions, and with applicable Laws, Regulations and Standards,even local. -
Page 17: Mounting And Fastening The Receiving Unit In The Best Position
It is recommended that adequate protection (e.g. a metal wire between the Receiving Unit and the Machine) is arranged to prevent it from falling should a release occur. Electrical panel of the Machine Metal housing of the socket Receiving Unit plug Machine socket Locking levers Receiving Unit AUTEC LIURPD002_eng-00... -
Page 18: Wiring
These connections cannot be modified. To power the HACRP8 (Type FA00M) or the HACRP8-A (Type FAA0M) Receiving Unit with 400V , connect it to a 230/400V three-phase electrical line (230V line to neutral; 400V line to line voltage). LIURPD002_eng-00 AUTEC... -
Page 19: Maintenance
Decommissioning and disposal Instructions for correct decommissioning and disposal of Radio Remote Controls are described in chapter "Decommissioning and disposal" in "Part A" of the Instruction Manual. Therefore, please refer to that part of the Manual. AUTEC LIURPD002_eng-00... - Page 20 Via Pomaroli, 65 - 36030 Caldogno (VI) - Italy Tel. +39 0444 901000 - Fax +39 0444 901011 info@autecsafety.com - www.autecsafety.com MADE IN ITALY...