5.5
GPS Configuration Menu
•
GPS NMEA Baud Rate – This is the baud rate used on the radio port to receive NMEA
sentences.
[1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200; 9600 bps]
•
GPS PPS Polarity – Indicates if the TTL PPS Pulse is Active High (
(
).
Negative Pulse
•
Use Legacy GPS Timing – Enable to allow the radio to work with existing/legacy TD220X or
TD220MAX systems. Disable in new deployments so that GPS Bases will work seamlessly with
PTP units.
[enabled, disabled; disabled]
NOTE
A mobile radio will transition from a system where the Legacy GPS Timing is enabled to a
system where it is disabled (or vice-versa) without a problem.
5.6
PTP Configuration Menu
Figure 20. PTP Configuration Menu - PTP Profile: None
MDS 05-6906A01, Rev. R
Figure 19. GPS Configuration Menu
[Negative Pulse, Positive Pulse; Negative Pulse]
TD220MAX Technical Manual
) or Active Low
Positive Pulse
23