Stfp Logger Menu - GE MDS TD220MAX Technical Manual

Robust communications for positive train control

Hide thumbs Also See for MDS TD220MAX:

Table of Contents

STFP Logger Menu

5.8.1

•

STFP Log Enable – If "enabled", the radio will send UDP messages to a log server.

disabled; disabled]

•

STFP Log Server – The IP address to send UDP messages for logging STFP traffic.

address; 192.168.1.1]

•

STFP Log Server Port – The IP port number to send UDP messages for logging STFP traffic.

65535; 777]

•

Transmitter Serial Number – Enabling this feature will put the serial number of the transceiver

(space permitting) in the over the air message so the receiver can identify the transmitter for each

message via the STFP log.

Figure 26. STFP Logger Menu

[enabled, disabled; disabled]

TD220MAX Technical Manual

[enabled,

[Any valid IP

MDS 05-6906A01, Rev R

[0-

Table of Contents