Table of Contents
Advertisement
Logged Events
6.1.3
The following events allow the transceiver to continue operation but do not make the PWR LED blink.
Event Log Entry
Time Synchronization Valid:
System Bootup
User Selected Reboot
Reprogramming Started
Reprogramming Complete
Reprogramming Failed
Telnet User Logged In/Out
Event Log Cleared
GPS PPS Ok/Not Available
GPS Signal OK/Inverted
NMEA Data – Valid/Invalid
Console User Logged Out/In
Parameter Changed
Configuration Script
Generated/Received
Auth Key Entered –
Valid/Invalid
Internal PTP Trigger
Active/Not Active
Clock Source set to:
Image Copy Started
Image Copy Complete
Image Copy Failed
Receiving NMEA True/False
GPS Fix Good/Bad
File
48
Table 9. Logged Events
Description
Displays the valid type of time source that
the radio is actively synchronized to.
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Displays if the GPS signal matches the
configured GPS PPS Polarity (OK) or not
(Inverted)
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Displays the IP address of the time source
(PTP) or connection to GPS.
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Self-explanatory
Shows actions (add, delete, link, rename)
done to files for the Communication
Manager.
TD220MAX Technical Manual
SNMP Trap
tod(21)
bootup(34)
reboot(35)
reprogStarted(36)
reprogCompleted(37)
reprogFailed(38)
telnetLogin(39)
logClear(41)
gpspps(42)
ppsinverted(43)
nmeadata(44)
consoleLogin(48)
parmChanged(50)
cfgscript(51)
authKey(52)
ptppps(55)
clockSource(57)
imageCopyStarted(59)
imageCopyComplete(60)
imageCopyFailed(61)
rxingnmea(62)
gpsfix(64)
file(65)
MDS 05-6906A01, Rev R
Advertisement
Table of Contents
