Menu Maps - GE PanaFlow XMT1000 User Manual

Chapter 2. Programming

2.5 Menu Maps

Use the menu maps in this section to program the desired XMT1000 features.
•
"Measurement Display Menu Map (Rev. 10)" on page 17
•
"Main Menu Map (Rev. 10)" on page 18
•
"SYSTEM Menu Map (Rev. 10)" on page 19
•
"MAIN Board I/O Menu Map (Rev. 10)" on page 20
•
"OPTION Boards Menu Map (Rev. 10)" on page 21
•
"SENSOR SETUP Menu Map (Rev. 10)" on page 22
•
"CALIBRATION Menu Map (Rev. 10)" on page 23
•
"ADVANCED Menu Map (Rev. 10)" on page 24
In addition, the following menu maps are available in Appendix C:
•
"HART Output Menu Map" on page 54
•
"HART Review Menu Map" on page 55
IMPORTANT: Not all users will have access to all of the above menus. Some menus are restricted to only those users
with the proper passcodes.
16 PanaFlow™ XMT1000 User's Manual